Supermicro SUPERSERVER 6015X-3, User Manual

Page: 80 / 144

7-12
S
UPER
S
ERVER 6015X-3/6015X-T/6015X-8 User's Manual
Memory Branch Mode
This option determines how the two memory branches operate. System address
space can either be interleaved between the two branches or Sequential from one
branch to another. Mirror mode allows data correction by maintaining two copies
of data in two branches. Single Channel 0 allows a single DIMM population during
system manufacturing. The options are Interleave , Sequential, Mirroring, and
Single Channel 0.
Branch 0/1 Rank Interleaving
Select enable to enable the feature of memory Interleaving for Branch 0 Rank/
Branch1 Rank. The options are 1:1, 1:2 and 1:4 .
Branch 0/Branch 1 Rank Sparing
Select enable to enable the sparing feature for Branch 0 Rank/Branch 1 Rank. The
options are Enabled and Disabled .
Enhanced x8 Detection
Select Enabled to enable Enhanced x8 DRAM UC Error Detection. The options
are Disabled and Enabled .
Crystal Beach Features
This feature cooperates with Intel I/O AT (Acceleration Technology) to accelerate
the performance of TOE devices. (*Note: A TOE device is a specialized,
dedicated processor that is installed on an add-on card or a network card to
handle some or all packet processing of this add-on card. For this motherboard,
the TOE device is built inside the ESB 2 South Bridge chip.) The options are
Enabled and Disabled.
Route Port 80h Cycles to
This feature allows the user to decide which bus to send debug information to. The
options are Disabled, PCI and LPC .
Clock Spectrum Feature
If Enabled, the BIOS will monitor the level of Electromagnetic Interference caused
by the components and will attempt to decrease the interference whenever needed.
The options are Enabled and Disabled .
Enabling Multi-Media Timer
Select Yes to activate a set of timers that are alternative to the traditional 8254
timers for the OS use. The options are Yes and No .
USB Function
Select Enabled to enable the function of USB devices specifi ed. The settings are
Enabled and Disabled.
Legacy USB Support
This setting allows you to enable support for Legacy USB devices. The settings
are Enabled and Disabled.