Supermicro SUPERSERVER 6015X-3, User Manual

Page: 55 / 144

Chapter 5: Advanced Serverboard Setup
5-21
Onboard Power LED (LE1)
LE1 is an onboard power LED. When
this LED is lit, it means power is pres-
ent on the serverboard. In suspend
mode this LED will blink on and off.
Be sure to turn off the system and
unplug the power cord(s) before re-
moving or installing components.
Unit Identifi er
A Unit Identifi er (UID) feature on the
server makes it easy to locate the unit
in a large stack. While servicing the
system, if you fi nd you need to work
on the other side of the unit, push the
UID button (located on the far left of
the control panel on the front and to
the right of the VGA port on the rear
of the chassis) to illuminate an LED on
the other side of the chassis. When
you walk around to the other side of
the rack, the unit will then be easy to
spot. The LED will remain on until the
UID button is pushed again. The rear
chassis UID is a button and LED in
one. The front control panel includes
a separate LED and button.
UID: Front Chassis Location
Button
Button/LED
LED
UID: Rear Chassis Location
VGA Port