Supermicro SUPERSERVER 6015X-3, User Manual

Page: 46 / 144

5-12
S
UPER
S
ERVER 6015X-3/6015X-T/6015X-8 User's Manual
5-8 Connecting Cables
Main Power Connector
The primary ATX power supply con-
nector (JWR1) is a 20-pin proprietary
power connector. Refer to the table on
the right for pin defi nitions.
Note: You must also connect the 9-
pin JPWR1 power connector to your
power supply (see below).
Required Connection
9-pin Power Connector
In addition to the main power con-
nector (above), the 9-pin proprietary
power connector at JPWR1 must also
be connected to your power supply.
See the table on the right for pin
defi nitions.
NMI Button
The non-maskable interrupt button
header is located on pins 19 and 20
of JF1. Refer to the table on the right
for pin defi nitions.
NMI Button
Pin Defi nitions (JF1)
Pin# Defi nition
19 Control
20 Ground
Power LED
The Power LED connection is located
on pins 15 and 16 of JF1. Refer to the
table on the right for pin defi nitions.
Power LED
Pin Defi nitions (JF1)
Pin# Defi nition
15 Vcc
16 Control
9-pin (Proprietary) Power Connector
Pin Defi nitions (JPWR1)
Pin Defi nition Pin Defi nition
1 SCLK 2 Ground
3 SDATA 4 SALERT#/Fail#
5 Ground 6 PWR_OK
7 PWS_ON 8 -12V
9 RSVD 10 Key
Main (Proprietary) 20-pin Power
Connector Pin Defi nitions (JWR1)
Pin# Defi nition Pin # Defi nition
10 +12V 20 Blocked
9 +12V 19 +12V
8 +12V 18 +12V
7 Ground 17 +12V
6 Ground 16 5Vsb
5 Ground 15 +3.3V
4 Ground 14 +3.3V
3 Ground 13 +5V
2 Ground 12 +5V
1 Ground 11 Ground