Supermicro SUPERSERVER 6015X-3, User Manual

Page: 48 / 144

5-14
S
UPER
S
ERVER 6015X-3/6015X-T/6015X-8 User's Manual
Power Button
The Power Button connection is
located on pins 1 and 2 of JF1. Mo-
mentarily contacting both pins will
power on/off the system. This button
can also be confi gured to function
as a suspend button (see the Power
Button Mode setting in BIOS). To turn
off the power when set to suspend
mode, depress the button for at least
4 seconds. Refer to the table on the
right for pin defi nitions.
Power Button
Pin Defi nitions (JF1)
Pin# Defi nition
1 PW_ON
2 Ground
PB UID/UID LED
A Unit Identifi er button/LED is located
next to the VGA port on the rear of
the chassis and a UID LED and but-
ton (separate) are located on the front
control panel. The UID LED connec-
tion is located on pins 3 and 4 of JF1.
Refer to the table on the right for pin
defi nitions.
PB UID/UID LED
Pin Defi nitions (JF1)
Pin# Defi nition
3 PB UID
4 UID LED
Fan Headers
The X7DBX-i/X7DBX-8 has fi ve fan
headers, each of which supports two
fans. Fan speed is controlled via
Thermal Management with a BIOS
setting. See the table on the right for
pin defi nitions.
Fan Header Pin Defi nitions
(FAN1/2 - FAN9/10)
Defi nition Pin# Color
Fan PWR 1 Red
Tachometer 2 Yellow
GND 3 Black
GND 4 Grey
Tachometer 5 White
Fan PWR 6 Orange