Supermicro SUPERSERVER 6015X-3, User Manual

Page: 49 / 144

Chapter 5: Advanced Serverboard Setup
5-15
USB Ports
Two Universal Serial Bus ports
(USB2.0) are located beside the key-
board/mouse ports. See the table on
the right for pin defi nitions.
Universal Serial Bus Ports
Pin Defi nitions (USB0/1)
USB0
Pin # Defi nition USB1
Pin # Defi nition
1 +5V 1 +5V
2 PO- 2 PO-
3 PO+ 3 PO+
4 Ground 4 Ground
Serial Port/Header Pin Defi nitions
(COM1/COM2)
Pin # Defi nition Pin # Defi nition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 Ground 10 NC
USB Headers
Three additional USB2.0 headers
(USB2/3 and USB4) are included on
the serverboard. These may be con-
nected to provide front side access.
A USB cable (not included) is needed
for the connection. See the table on
the right for pin defi nitions.
Universal Serial Bus Headers
Pin Defi nitions (USB2/3, USB4)
USB2
Pin # Defi nition USB3
Pin # Defi nition
1 +5V 1 +5V
2 PO- 2 PO-
3 PO+ 3 PO+
4 Ground 4 Ground
5 Key 5 No connection
Serial Port/Header
COM1 is a port on the I/O backplane
and COM2 is a header located near
the fl oppy drive connector. See the
table on the right for pin defi nitions.
Note: Pin 10 is included on the header but not on
the port. NC indicates no connection.
ATX PS/2 Keyboard and
PS/2 Mouse Ports
The ATX PS/2 keyboard and the PS/2
mouse ports are located on the I/O
backplane. The mouse is the green
port and the keyboard is purple. See
the table on the right for pin defi ni-
tions.
PS/2 Keyboard and
Mouse Port Pin
Defi nitions
Pin# Defi nition
1 Data
2 NC
3 Ground
4 VCC
5 Clock
6 NC