C-26
S
UPER
S
ERVER 6015X-3/6015X-T/6015X-8 User's Manual
To format a disk
Note:
The operation of
Formatting Disk
allows you to perform a low-level formatting
of a hard drive by writing zeros to the entire disk. Serial ATA drives are low-level
formatted at the factory and do not need to be low-level formatted again.
1. When the screen shown below displays, select
Format Disk
and press
<Enter>
.
The following screen appears:
2. Read the warning message when it appears in the screen as shown below. To
continue with disk formatting, select
Yes
and hit
<Enter>.
Otherwise, select
No
and press
<Enter>
.
Caution:
Formatting a disk destroys all data on the drive. Be sure to back up your
data before formatting a disk.
Summary of Contents for SUPERSERVER 6015X-3
