Supermicro SUPERSERVER 6015X-3, User Manual

Page: 136 / 144

C-30
S
UPER
S
ERVER 6015X-3/6015X-T/6015X-8 User's Manual
C-4 Installing Windows XP/2000/2003 for RAID Systems
New Operating System-Windows XP/2000/2003 Installation
1. Insert the Microsoft Windows XP/2000/2003 Setup CD in the CD Drive and the
system will start booting up from CD.
2. Press the <F6> key when the message" Press F6 if you need to install a third
party SCSI or RAID driver" displays.
3. When the Windows XP/2000/2003 setup screen appears, press "S" to specify
additional device(s).
4. Insert the driver diskette-"Intel AA RAID XP/2000/2003 Driver for ESB2 into Drive
A: and press the <Enter> key.
5. Choose Intel(R) ESB2 SATA RAID Controller from the list indicated in the
XP/2000/2003 setup screen and press the <Enter> key.
6. Press the <Enter> key to continue the installation process. (If you need to specify
any additional devices to be installed, do it at this time.) Once all devices are speci-
fi ed, press the <Enter> key to continue with the installation.
7. From the Windows XP/2000/2003 setup screen, press the <Enter> key. The
XP/2000/2003 setup will automatically load all device fi les and then continue with
the Windows XP/2000/2003 installation.
8. After the Windows XP/2000/2003 installation is completed, the system will au-
tomatically reboot.
9. Insert the Supermicro CD that came with the package into the CD drive during
system reboot, and the following screen will appear:
Note: the current version of the ESB2 SATA RAID Utility can only support Windows
XP/2000/2003 Operating System.