Supermicro SUPERSERVER 6013A-T, User Manual

Page: 82 / 126

7-14
S
UPER
S
ERVER 6013A-T User's Manual
DMA Mode
Select Auto to allow the BIOS to auto-detect the DMA mode. Use this value
if the IDE disk drive support cannot be determined. Select SWDMA0 to allow
the BIOS to use Single Word DMA mode 0, which has a data transfer rate of
2.1 MBs. Select SWDMA1 to allow the BIOS to use Single Word DMA mode
1, which has a data transfer rate of 4.2 MBs. Select SWDMA2 to allow the
BIOS to use Single Word DMA mode 2, which has a data transfer rate of 8.3
MBs. Select MWDMA0 to allow the BIOS to use Multi Word DMA mode 0,
which has a data transfer rate of 4.2 MBs. Select MWDMA1 to allow the
BIOS to use Multi Word DMA mode 1, which has a data transfer rate of 13.3
MBs. Select MWDMA2 to allow the BIOS to use Multi-Word DMA mode 2,
which has a data transfer rate of 16.6 MBs. Select UDMA0 to allow the
BIOS to use Ultra DMA mode 0, which has a data transfer rate of 16.6 MBs
(the same transfer rate as PIO mode 4 and Multi Word DMA mode 2. Select
UDMA1 to allow the BIOS to use Ultra DMA mode 1, which has a data
transfer rate of 25 MBs. Select UDMA2 to allow the BIOS to use Ultra DMA
mode 2, which has a data transfer rate of 33.3 MBs. Select UDMA3 to
allow the BIOS to use Ultra DMA mode 3. Select UDMA4 to allow the BIOS to
use Ultra DMA mode 4. Select UDMA5 to allow the BIOS to use Ultra DMA
mode 5. Select UDMA6 to allow the BIOS to use Ultra DMA mode 6. Options
are " Auto ", "SWDMA0", "SWDMA1", "SWDMA2", "MWDMA0", "MWDMA1",
"MWDMA2", "UDMA0", "UDMA1", "UDMA2", "UDMA3", "UDMA4", "UDMA5"
and "UDMA6".
S.M.A.R.T. For Hard disk drives
Self-Monitoring Analysis and Reporting Technology (SMART) can help pre-
dict impending drive failures. Select "Auto" to allow BIOS to auto detect
hard disk drive support. Select "Disabled" to prevent the BIOS from using
the S.M.A.R.T. Select "Enabled" to allow the BIOS to use the S.M.A.R.T. to
support hard drive disk. The options are "Disabled", "Enabled" and " Auto ."
32-Bit Data Transfer
Select "Enabled" to activate 32-bit data transfer. Select "Disabled" to deac-
tivate the function. The options are "Enabled" and " Disabled ".
allow the BIOS to use PIO mode 1, which has a data transfer rate of 5.2
MBs. Select 2 to allow the BIOS to use PIO mode 2, which has a data
transfer rate of 8.3 MBs. Select 3 to allow the BIOS to use PIO mode 3,
which has a data transfer rate of 11.1 MBs. Select 4 to allow the BIOS to
use PIO mode 4, which has a data transfer rate of 16.6 MBs. This setting