Supermicro SUPERSERVER 6013A-T, User Manual

Page: 109 / 126

Appendix C: Software Installation
C-7
Creating Arrays
Before creating arrays, make sure the disks for the array are connected
and installed in your system. Note that disks with no usable space or disks
that are not initialized are shown in gray and cannot be used. See Initializ-
ing Disk Drives .
To create an array:
1. Turn on the computer and press <Ctrl+A> when prompted to access the
ARC utility.
2. From the ARC menu, select the Array Configuration Utility Main Menu
(ACU) (as shown on the first screen on page C-5).
3. From the ACU menu, select Create Array .
4. Select the disks for the new array and press <Insert> (as shown on the
screen shown below).
Note: To deselect any disk, highlight the disk and press <Delete>.
5. Press <Enter> when both disks for the new array are selected. The
Array Properties menu is then displayed (as shown on the next page).