Supermicro SUPERSERVER 6013A-T, User Manual

Page: 73 / 126

Chapter 7: AMIBIOS
7-5
7-3 Advanced BIOS Setup
The Advanced BIOS Setup screen is shown below. The sub menus are
described on the following pages.
transfer rate of 25 MBs. Select UDMA2 to allow the BIOS to use Ultra DMA
mode 2,which has a data transfer rate of 33.3 MBs. The Options are
" Auto ", "SWDMA0", "SWDMA1", "SWDMA2", "MWDMA0", "MWDMA1",
"MWDMA2","UDMA0", "UDMA1", and "UDMA2".
S.M.A.R.T. For Hard disk drives
Self-Monitoring Analysis and Reporting Technology (SMART) can help pre-
dict impending drive failures. Select "Auto" to allow BIOS to auto detect
hard disk drive support. Select "Disabled" to prevent the BIOS from using
S.M.A.R.T. Select "Enabled" to allow the BIOS to use S.M.A.R.T. to support
hard drive disk.
32-Bit Data Transfer
Select "Enabled" to activate the 32-Bit data transfer function. Select " Dis-
abled " to deactivate the function.
System Memory
When AMI BIOS auto detects the System Memory, it will automatically dis-
play the size of the memory.