Supermicro SUPERSERVER 6013A-T, User Manual

Page: 105 / 126

Appendix C: Software Installation
C-3
Configuring BIOS Settings for Enhanced Mode
1. Press the <Del> key during system bootup to enter the BIOS Setup Utility.
Note: If it is your first time to power on the system, we recommend that you
load the Optimized Default settings. If you have already done so, please
skip to Step 3.
2. Use the arrow keys to select the "Exit" Menu. Once in the "Exit" Menu,
scroll down the menu to select the item "Load Optimized Default Settings"
and press the <Enter> key. Select "OK" to confirm the selection. Press the
<Enter> key to load the default settings to the BIOS.
3. Use the arrow keys to select the "Advanced" Menu.
4. Scroll down to "IDE Configurations" and press the <Enter> key to select
this option.
5. Scroll up to "SATA Mode" and select "Configure SATA as RAID". Press
the <Enter> key to select this option.
6. Press the <Esc> key and scroll down to "Exit". Select "Save and Exit"
from the "Exit" menu. Press the <Enter> key to save the changes and exit
the BIOS.
7. Once you've exited the BIOS setup utility, the system will reboot.
8. During the system startup, press the <Ctrl> and the <A> keys simulta-
neously to run the Adaptec RAID Configuration Utility when prompted by the
following message:
Press <Ctrl><A> for Adaptec RAID Configuration Utility