Supermicro SUPERSERVER 6013A-T, User Manual

Page: 113 / 126

Appendix C: Software Installation
C-11
Adding a Bootable Array
1. From the Main menu, select Manage Arrays.
2. From the List of Arrays, select the array you want to make bootable, and
press <Ctrl+B>.
3. Enter Y to create a bootable array when the following message is displayed:
"This will make all other existing bootable array non-bootable. Do you want to
make this array bootable? (Yes/No):" A bootable array will then be created
and an asterisk will appear next to the new bootable array as shown on the
screen below.
Deleting a Bootable Array
1. From the Main menu, select Manage Arrays.
2. From the List of Arrays, select the bootable array (*) you want to delete and
press <Ctrl+B>. A bootable array is an array marked with an asterisk, as
shown in the screen above.
3. Enter Y to delete a bootable array when the following message is displayed:
"The array is already marked bootable. Do you want to make this array as not
bootable? (Yes/No):" The bootable array will then be deleted and the asterisk
will disappear.
Note: Do not use the delete key to delete a bootable array.