Supermicro SUPERSERVER 6013A-T, User Manual

Page: 110 / 126

C-8
S
UPER
S
ERVER 6013A-T User's Manual
Assigning Array Properties
Once you've created a new array, you are ready to assign properties to it.
Caution: Once the array is created and its properties are assigned, you
cannot change the array properties using the ACU. You will need to use the
Adaptec Storage Manager - Browser Edition (refer to Adaptec's User's
Guide in the enclosed CD).
To assign properties to the new array:
1. In the Array Properties menu, select an array type and press <Enter>.
Note that only the available array types (RAID 0 and RAID1) are displayed
on the screen. (RAID 0 and RAID 1 require two drives.)
2. Under " Arrays Label ", type in a label and press <Enter>. The label
cannot be more than 15 characters long.
3. For RAID 0, select the desired stripe size. Available stripe sizes are 16,
32, and the default of 64 KB. It is recommended that you do not change the
default setting.