Supermicro SUPERSERVER 6013A-T, User Manual

Page: 54 / 126

5-16
S
UPER
S
ERVER 6013A-T User's Manual
Front Side USB
Three additional USB headers (at
JD2 and J27) can be used for
front side USB access (see the
motherboard layout for locations).
You will need a USB cable (not in-
cluded) to use either connection.
Refer to the table on the right for
pin definitions.
Serial Ports
The COM1 serial port is located
next to the USB 0/1 ports. COM 2
is located at the corner of the
board near the PCI #5 slot (see
m o t h e r b o a r d l a y o u t ) . S e e t h e
table on the right for pin defini-
tions. The COM2(J26) connector
is a header on the motherboard
(see motherboard layout).
Serial Port Pin Definitions
(COM1, COM2)
Pin Number Definition
1 CD
2 RD
3 TD
4 DTR
5 Ground
Pin Number Definition
6 DSR
7 RTS
8 CTS
9 RI
10 NC
Ethernet Ports
Two Ethernet ports (one Gb LAN
port and one Mb LAN port) are
located beside the VGA port on
the I/O backplane. These ports
accept RJ45 type cables.
Note: Pin 10 is included on the header but not on
the port.
Front Side USB Pin Definitions
Pin
Number
Definition
1 +5V
2 P0-
3 P0+
4 Ground
5 Key
Pin
Number
Definition
1 +5V
2 P0-
3 P0+
4 Ground
5 N/A
USB0/1 (JD2)
USB2 (J27)