SUNWARD SWE215F-5, Operation & Maintenance Manual

Page: 80 / 182

OPERATION & MAINTENANCE MANUAL SWE215F
73
3.2.10 Starting Switch
Starting switch is used to start or shut the engine.

OFF position
You can insert or remove key. All electrical
system switches are shut-down except indoor
lamp. Engine is stopped as well.

ON position
Power is on by turning the key from OFF to
ON position. Hold the starting switch key in
ON position when engine is running.

START position
It’s engine starting position. When starting the
engine, hold the key in this position. With
engine started, release the key immediately; it
will go back to ON position automatically.
3.2.11 Throttle Control Knob

This knob is used to regulate engine rev and
power output.
(a) low idle speed position
(b) high idle speed position

When shifting accelerator control knob from
position “a” to position “b”, engine rev will
increase.
 When shifting the knob from position “b” to
“a”, engine rev will decrease.