SUNWARD SWE215F-5, Operation & Maintenance Manual

Page: 36 / 182

OPERATION & MAINTENANCE MANUAL SWE215F
29
machine.

When traveling uphill, set the cab facing uphill
direction. For downhill, set the cab facing downhill
direction. When traveling, always check the firmness
of the ground in front of machine.

When traveling uphill, extend the working device to
the front to improve the balance, keep the working
device 20 to 30cm and travel at low speed.

When traveling downhill, lower the engine speed,
keep the travel lever close to the neutral position, and
travel at low speed.

When traveling on slopes, operate machine straight up
or straight down, steering or crossing on the slope is
very dangerous. Always descend to a flat area to
change direction, then travel uphill again.

When traveling on grass, fallen leaves or wet steel
plates always travel at low speed because there is a
risk of slip even if traveling on a slight grade.

In case that engine stops when traveling on a slope,
place control lever to neutral position immediately,
and re-start the engine.
1.3.13 Safety Rules during Towing

Warning: Improper towing may damage machine,
any mistake on selecting steep rope or inspection
can result in serious injury or death.

Always wear gloves when handling steel ropes.

Secure steel ropes to track frame.

During towing operation, do not stand between the
towing machine and the machine being towed.

Do not tow machine on slopes.

Never use a wire rope which has cut strands, reduced
diameter, or kinks. There is danger that the rope may
break during the towing operation.
1.3.14 Machine Transportation

Warning: When loading or unloading the machine,
there is a hazard of tipping over or falling.

During transportation on road, follow the local laws
and regulations. Study all local laws or regulations
concerning limiting load weight, width and length.
Dismantle the machine if necessary. Select proper