SUNWARD SWE215F-5, Operation & Maintenance Manual

Page: 59 / 182

OPERATION & MAINTENANCE MANUAL SWE215F
52
warning light will light; no warning, the light is white.
8. SUNWARD LOGO: .
9. Fuel quntity icon: . On the side of E means that fuel is a little, on the side of F means
that lots of fuel. When the pointer turns to the red area on the E side, the fuel oil should be refilled in
time.
10. Engine cooling water temperature icon is , on the side of C means low water
temperature, on the side of H means high water temperature. When the pointer turns to the white area
on the C side, the water temperature is too low; When on the red area on the H side, the water
temperature is too high.
11. GPS fault information: the icon is , it displays when GPS fault occurs. There’re nine number
including 001 to 009.
12. System time: means Dec. 9th, 2019 ten sixteen.
13. Work hour
：
display like this , it means the machine worked for
10008.2
hours.
14. One key of idle speed: the icon is . Press the top of the left handle to change to auto-idle speed.
The yellow icon of auto-idle speed displays on the main interface, then press the top of the left
handle again, and the icon disappear.
15. means preheating, when machine is preheating, the icon is red, or is white
。
16. is the warning icon for overheated coolant. When system detects that the temperature of
coolant is high, this icon is red, or is white.
17. is the warning icon for low fuel oil level. When system detects low fuel oil level, this icon is
red, or is white.
18. is warning icon for clogged air filter. When system detects clogged air filter, this icon is red, or
is white.
19. is for charging. When system detects battery is charging, this icon is red, or is white.
20. is for low engine oil pressure, when system detects low engine oil pressure, this icon is red, or
is white.
21. is the warning icon for emergency stop. After pressing down the emergency stop button, the
machine is shut down with buzzer warning. And on the main interface, this icon is red flickering on
the main interface. After switching on the emregency-stop button, the buzzer is mute and the warning