SUNWARD SWE215F-5, Operation & Maintenance Manual

Page: 49 / 182

OPERATION & MAINTENANCE MANUAL SWE215F
42

Raise boom to proper height.

Align the center line of machine track with that of
ramp and travel slowly.

When machine is over the rear wheels of the trailer,
operate on the machine slowly so that the machine
could transfer to the ramp smoothly.

When on the ramp, adjust working equipment angle so
that the angle of boom and arm is within 90-110°.
Lower the bucket to the ground until the machine
leave ramp.
2.1.7 Lifting Machine
Note

Never raise the machine with any worker on it.

Make sure the wire rope has sufficient strength
for the weight of the machine. The service
condition must be in accordance with relevant
forced standard.

Swing the working equipment to the sprocket
end, set the undercarriage and upper structure
parallel. Do not swing to the other direction.

Do not lift the machine in any posture other
than the posture given in the right fig.

When lifting, keep the machine horizontal.
Never walk under the machine.

This lifting procedure applies to machine with
standard specifications.

To get the lifting methods information for the
machines equipped with other attachments or
optional devices, please contact SUNWARD or
our distributor.
Machine lifting operation

Set work equipment to the sprocket side. Extend arm
cylinder and bucket cylinder to their end of stroke,