Suntex EC-4110-I, Operation Manual, Page: 8 / 88

Description of calibration settings (see chapter 8 for details)
ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ ġ
Press and simultaneously to see the last calibration information. Then press if you
would like to make a new calibration or modify setting of calibration. Press keypad according to
index of keypad on the screen.
Index of keypad :
keypad Accordingly item Description
Back to upper layer
Choose leftward of change to left page
Increase digit
Choose rightward of change to right page
Decrease digit
Confirm settings after modifications and then go through next
step
Selection of calibration items
keypad Accordingly item Description
Cell Constant
To adjust the instrument cell constant setting until the value
goes the same with the given cell constant of the sensor
Std. Solution Use the appropriate standard solution to calibrate the system
Zero Zero-point calibration
Return Time interval setting of returning to the measurement mode
Code Security code of calibration mode.
Note
ġ
Due to the need for continuous improvement of the transmitter function, we reserve the right to modify the
content and the icon of the function. The actual icons and contents are subject to the instrument without notice.
м