1.2 Product packing
1.2.1 Standard accessories
1.
Transmitter
2.
8-201-PFA-10 sensor assembly(Including temperature sensor with PTC1000 and signal cable
for 10 meter)
1.2.2 Optional accessories
If necessary, please order the spare parts as follows:
1.
Installation
炷
please refer to ch.11: Installation of Sensor Assembly
炸
1.1
Flange Mounting
1.
8-201-PFA-10 sensor assembly
2.
5419059 Teflon gasket
3.
5420048 FEP sealing loop
4.
5329003 G3/4" hexagon nut
1.2
Tee installation
1.
5419061 stell tee(2"-3/4")
2.
5329003 G3/4" hexagon nut
1.3
Immersion installation
1.
5419060 immerison nut fitting(1"-3/4")
2.
7202-DO100 DO protection holder 1M
3.
Threading type
烉
8-26 waterproof cap or coiling type
烉
8-09-6 circle junction box
2.
Extension cable max. up to 50M (zero-point calibration, cell constant calibration or product
adjustment are required after installation)
1.
8-09-9 square junction box 9T
2.
5251023 signal cable, please advise specific length as ordered(M)
3.
Standard calibration buffers(optional)
Note: Installation can be referred to chap. 11: Installation of Sensor Assembly
1.3 Measurement principle
1.
EC-4110-I/EC-4110-ICON utililze conversion of electric field and magnetic field to measure
the conductivity in a sample solution. Sensor assembly is composed of Drive Coil and
Receive Coil, whose induction is not directly contact with sample solution, belonging to
inductive type. It is also composed of chemical-resistant materials, for example: the
8-201-PFA-10 is made up of PFA that can be applied to acidic, alkaline, salt solutions,
effluents, etc. in online monitoring industrial environments.
2.
EC-4110-I/EC-4110-ICON apply alternative signals of electric field to activate drive coil to
produce the magnetic field. After that, sample solution(containing ions in different conc.)
turns into a conductive circuit, and then the signal can be received on receive cell, turned into
magnitude of current to measure the conductivity.
3.
The temperature probes have three-wiring type PTC1000 and PTC100 and two-wiring type
NTC30K as reference. Users can select the spec according to sensor assembly.
Ⱦ
Cond.@tx
ȿ
which presents conductivity is being measured at actual tmeperature
Ⱦ
tx
ȿ
, is regarded as
absolute conductivity. Refer to temperature compensation modes (linear, non-linear, or off)
п
Summary of Contents for EC-4110-I
