Suntex EC-4110-I, Operation Manual

Page: 62 / 88

8.2 Security password of calibration (Code)
Select the Code (password) icon after entering calibration setup mode. Select to activate code
function or not. The default Calibration setting code is “1100”.
Press or to
select
Press to confirm it.
Press to confirm it.
Press to confirm it.
Press to confirm it.
Enter “Cell Constant Calibration”
Press to confirm it.
The first ‘0” of digits ‘0000” start
to twinkle. Press or to
adjust the value, and then press
to confirm it and continually key
in the next digit, and so on.
If you input a wrong code, then
the display shows a “Error
Code” message. Press
to restart inputting another
code, or press to exit
the calibration menu.
(Select to turn on or turn off code
protection function. If you select
turn on, please key in a new code.
There will be a code requirement
showing in display when you
re-enter to the setup mode. Key in
the correct password to enter into
calibration setup menu.)
Input the new code.
The steps are as above.
3
ор