SunSynk G01LP1-US/EU, Installer Manual

Page: 29 / 45

29
Hybrid Parity (Super) Inverter 3.6kW/5.5kW/8.8kW Plus Parallel Version
www.sunsynk.com
``
Therefore, if a communication error shows up on the display:
1. Check if your data cable is the correct type.
2. Check if you are plugging the cable into the correct sockets. Usually, RS 485 is employed, but some
battery manufacturers use others.
It is important to always refer to the documentation of the battery manufacturers when installing the
battery. Below there is a list of batteries that has been examined, tested, and approved by Sunsynk.
Brand Model
RS485 or
CAN Inverter
Setup
Notes
Pylon or
Equivalent
US2000
CAN 0
RS485 5
US20000-PLUS
CAN 0
RS485 5
DYNESS
B4850 CAN 0
Short Lione 6&7 at inverter
side
POWERBOX F CAN 0
CCGX 48Vxxxx CAN 0
Need confirm CAN_H
CAN_L
SACRED SUN 48Vxxxx RS485 1 Cut Line 3, 6, 8
SOLAX 48Vxxxx CAN 0
KOK 48Vxxxx RS485 2
UZ ENERGY
UZ-EB51.2-100-
A11
CAN 0
Topakpower 48Vxxxx RS485 4
Hai Ying HY48050 CAN 0
Re-Power LS4850 CAN 0
NOTE
Some types of lithium battery the BMS cannot be controlled by Sunsynk inverter. In this case, treat
the battery as a lead-acid type and set the charging and discharging protocol following the battery
manufacturer specification.