18
Hybrid Parity (Super) Inverter 3.6kW/5.5kW/8.8kW Plus Parallel Version
www.sunsynk.com
``
3.5. Connecting the PV
The inverter has two built-in MPPT controllers, MPPT 1 and MPPT 2, which can connect two arrays
of photovoltaic panels in parallel with a maximum current of 18 Amp (as shown below).
Before connecting to PV modules, install a separate DC circuit breaker between the inverter and PV
modules.
To avoid any malfunction, do not connect any PV modules with possible current leakage to the inverter.
For example, grounded PV modules will cause current leakage to the inverter. Open-circuit voltage
(Voc) of PV modules does not exceed max. PV array open-circuit voltage open-circuit voltage (Voc)
of PV modules should be higher than min. start voltage.
Summary of Contents for G01LP1-US/EU
Page 3: ......
