5 Installing Inverter onto Wall
User Manual
20
Place the inverter at eye level for easy
viewing and operation.
>300
mm
ground
Install the inverter vertically or at a maximum back tilt of 75 degrees. Do not
install the inverter leaning forward or upside down.
Leaning forward
Up side down
Ground
Leaning backward
≥
450
mm
(17
.7
inch
)
0~75
°
If the included angle between the installation site and the plumb
line is greater than 75
°
, install the inverter on the frame to meet the
requirement for installation angle. The frame and the inverter are
installed as shown in the following figure.
The rack
The final station
For detailed frame installation solution, contact Sungrow.
