User Manual
2
Always follow the instructions contained in the manual when moving and
positioning the inverter.
The weight of the equipment can cause injuries, serious wounds, or bruise
if improperly handled.
During Installation
Prior to installing the inverter onto the wall, it is crucial to make certain that the
inverter is not electrically connected.
Prior to installing the inverter onto the wall, it is crucial to make certain that
the inverter is not electrically connected.
System performance loss due to bad ventilation!
The equipment requires good quality ventilation during operation. It is
essential to keep the unit upright and nothing covering the heat sink in
order to ensure that the equipment interior is well cooled down.
During Electrical Connection
Lethal voltage exists!
PV arrays will generate electrical energy when exposed to sunlight and thus
can create an electrical shock hazard.
Wiring of the PV arrays should only be performed by qualified personnel.
PV modules should be covered by opaque materials during wiring.
All cables must be firmly attached, undamaged, properly insulated and
adequately dimensioned.
During Inverter Operation
Do not open the enclosure when the inverter is under voltage. There is an unlikely
