User Manual
85
10.11.4 Protection Recovery Setting
After setting the protection parameters, inverter
enters protection recovery interface.
Fmax-recover 00.00Hz
Fmin-recover 00.00Hz
Vmax-recover 000.0V
Vmin-recover 000.0V
Pro-recover
Tab. 10-12
Description of protection recovery parameters
Parameter
Explanation
Vmax-recover
Max. protection recovery voltage
Vmin-recover
Min. protection recovery voltage
Fmax-recover
Max. protection recovery frequency
Fmin-recover
Min. protection recovery frequency
10.11.5 Protection Parameter Confirmation
The setting confirmation interface will
appear once the protection parameters are
input. Press
ENTER
to confirm the parameter
selection and press
ESC
to reset the
protection parameters.
Setting confirmation
Countries Other
Pro-stage Single-stage
Grid codes MV
Date 2015/01/31
Confirm above settings?
10.12
Communication Parameter Setting
Main Screen (Press
ENTER
)
→
Menu (Press
×
3)
→
Set-param (Press
ENTER
)
→
Enter
password (Press
ENTER
, Press
×
3)
→
Com-param (Press
ENTER
)
Press
to move cursor and press
to set
the appropriate value. Confirm settings by
Pressing
ENTER
.
Com-param
Modbus param
Uart param
