Sun Microsystems SPARC Series, Service Manual

Page: 38 / 192

2-16 SPARC Enterprise M3000 Server Service Manual • January 2009
2.5 Labels
This section explains the labels affixed to the server.
A label-affixed card that can be inserted or extracted is provided near the power
supply unit at the right side at the rear of the server (see
TABLE 2-6
). The information
on the label might differ from that shown on the affixed labels.
■
The model number, serial number, and hardware version, all of which are
required for maintenance and management, are shown on the system faceplate
label.
■
The standards label is affixed close to the system faceplate label and shows the
approval standards.
■
Safety: NRTL/C
■
Radio wave: VCCI-A, FCC-A, DOC-A, MIC
■
Safety and radio wave: CE
The card should be instered in such a way that the standards label faces the outside
of the server and the system faceplate label faces the inside of the server.
FIGURE 2-6
Label Locations
Inside: System faceplate label
Outside: Standards label