Sun Microsystems Netra 240, Service Manual

Page: 49 / 154

Chapter 2 Preparing to Service the System 31
FIGURE 2-7
Opening the Rotating Service Module
Closing the Rotating Service Module
Following are the instructions for closing the rotating service module once you have
completed the service procedures for the rotating service module components (see
Chapter 4 ).
1. Close the rotating service module back into position.
2. Tighten the two captive screws to secure the rotating service module to the server
(
FIGURE 2-7
).
3. Install the server cover back onto the server.
See “Installing the Server Cover” on page 29 .
Captive screws
Rotating service module