Sun Microsystems Netra 240, Service Manual

Page: 47 / 154

Chapter 2 Preparing to Service the System 29
FIGURE 2-6
Two Methods of Hanging the Detached Cover on a Netra 240 Server
Installing the Server Cover
Following are the instructions for installing the cover back onto the server once you
have completed the service procedures for the internal components.
1. Place the server cover back on top of the server and push it all the way forward.
Ensure that the rear corners of the cover are properly seated.
2. Tighten the captive screw in the back of the cover (
FIGURE 2-5
).
3. Power on the server.
See “Powering On the Server” on page 20 .
Bezel must
be open
Bezel can
be open or closed