Sun Microsystems 817-4054-15, Servise Manual

Page: 175 / 204

13-1
C H A P T E R
13
Baseplane
This chapter describes how to remove and replace the baseplane, which is located at
the bottom of the system (
FIGURE 13-1
).
13.1 Baseplane Overview and Cautions
Caution –
Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in its ESD safe packaging box before placing them on any surface.
Caution – This procedure requires the system to be extended out of the system
cabinet on its slides. You must extend the system cabinet stabilization bar.
FIGURE 13-1
Baseplane Location in the System
Baseplane