Sun Microsystems 817-4054-15, Servise Manual

Page: 158 / 204

10-8 Sun Fire E2900 System Service Manual • May 2006
10. Reconnect the I/O cables at the rear of the system.
11. Reconnect the I/O cables from the removable media modules to the IB_SSC
assembly.
12. Close the removable media bay and I/O bay covers.
13. Remove the antistatic wrist.
14. Slide the system into the system cabinet and secure it.
See Section 3.1, “Sliding the System Out of the System Cabinet” on page 3-1 .
15. Retract the system cabinet stabilizer bar.
16. Power on the system.
See Section 4.1, “Powering On the System” on page 4-1 .
10.2 I/O Cards
Note –
There are three versions of IB_SSC assemblies, PCI, PCI+ and PCI-X. Consult
your Sun representative for cards supported by your version of the IB_SSC assembly.
Caution – This procedure requires the system to be extended out of the system
cabinet on its slides. You must extend the system cabinet stabilizer bar.
I/O cards are located in the I/O bay (
FIGURE 10-6
).