TO ENSURE YOUR USER INFORMATION IS UP TO DATE PLEASE DOWNLOAD THE LATEST VERSION OF THIS MANUAL FROM WWW.SUEX
Page 41 of 48
43.3 A
DJUSTING THE GRASP POSITION
.
Figure 12
To adjust the grasp position (40) (see fig. 11), unscrew the 4 screws (48) (see fig. 12)
remove the grasp (40) and reposition it screwing the screws into the selected holes
(49). There are three possible positions.
Accessory support
The purpose of the accessory support (46)(see fig 11), is to be able to attach the
specific accessories that may be useful during dives on the handle. For this reason,
SUEX has created some supports to be used with normal wrist or console tools.
Support use.
Loosen the lock screw (44) (see fig.11) and insert the support.
Tighten the lock screw only using two fingers.
Always make sure the screw is fully screwed in when the support is not used.
43.4 N-HANDLE
DEVICE
M
AINTENANCE
.
The N-HANDLE does not require special maintenance. Follow the ADV’s general
maintenance instructions.
Summary of Contents for XJ37
Page 50: ......
