Subaru Tribeca 2010 Owner'S Manual Download Page 54

Page: 54 / 525

Keeping the display clean

Do not touch the display screen with bare hands. The display screen is easily soiled with hand grease.

Use a soft, dry cloth to clean the display screen surface. Do not use organic solvents.

The screen surface is sensitive to scratches or other physical damage. Avoid pushing on it strongly or rubbing it with a hard cloth or

any other scratchy material.

NOTE

The screen is made of a liquid crystal display (LCD) panel. When the system is turned on in an extremely low outside tem-

perature, the LCD takes a relatively long time to become bright. On the other hand, when the outside temperature is high,

the LCD may become darker than usual. Both conditions are normal.

Images on an LCD screen may contain some tiny black spots and/or bright spots. They reflect a characteristic normal to

the LCD and do not indicate any abnormal condition.

Basic Operations

Summary of Contents for Tribeca 2010














































































































































































































































































































































































































































































































































Search results

Summary of Contents for Tribeca 2010

Reviews:

Related manuals for Tribeca 2010

Brands by name

Popular brands

Subaru Tribeca 2010, Owner'S Manual

Search results

Summary of Contents for Tribeca 2010

Reviews:

Related manuals for Tribeca 2010

Brands by name

Popular brands