Subaru Tribeca 2010 Owner'S Manual Download Page 30

Page: 30 / 525

Displaying Vehicle Information and Programming Vehicle System Functions

Select

if you want to save the changes.

Select

if you do not want to save the changes.

The monitor system will return to the vehicle information screen.

This completes the procedure.

NOTE

• If

is selected after Step 2 or 3, following screen is displayed.

is selected, the touch panel’s sensing positions will revert to the default positions.

is selected, the touch panel’s sensing positions will revert to the original positions.

• If you select

after Step 2 or 3, you can return to the previous screen.

• The adjustment performed becomes effective as soon as you make it.

• At the time of delivery of the vehicle to the first user, the touch sensing positions are adjusted correctly. Use the above procedure if you

feel that they have deviated from the correct positions.

Tribeca_Monitor-06.qxd 06.2.22 3:20 PM Page 29

Summary of Contents for Tribeca 2010














































































































































































































































































































































































































































































































































Search results

Summary of Contents for Tribeca 2010

Reviews:

Related manuals for Tribeca 2010

Brands by name

Popular brands

Subaru Tribeca 2010, Owner'S Manual

Search results

Summary of Contents for Tribeca 2010

Reviews:

Related manuals for Tribeca 2010

Brands by name

Popular brands