Subaru Tribeca 2010, Owner'S Manual

Page: 274 / 525

Black plate (170,1)
北 米
Model "A3150BE-A" EDITED: 2009/ 6/ 23
3-42
Instruments and controls
!
Compass zone adjustment
1. The zone setting is factory preset to
Zone 8. Refer to the
“
Compass calibration
zone
”
map attached to the end of this
manual to verify that the compass zone
setting is correct for your geographical
location.
2. Press and hold the right button for 3
seconds then release, and the word
“
ZONE
”
will briefly appear and then the
zone number will be displayed.
3. Press the right-hand button repeatedly
to cycle the display through all possible
zone settings. Stop cycling when the
correct zone setting for your location is
displayed.
4. Releasing the button for 3 seconds will
exit the zone setting mode.
&
Outside mirrors
!
Convex mirror (passenger side)
WARNING
Objects look smaller in a convex
mirror and farther away than when
viewed in a flat mirror. Do not use
the convex mirror to judge the
distance of vehicles behind you
when changing lanes. Use the inside
mirror (or glance backwards) to
determine the actual size and dis-
tance of objects that you view in
convex mirror.
!
Remote control mirror switch
The remote control mirrors operate only
when the ignition switch is in the
“
ON
”
or
“
Acc
”
position.
1. Turn the knob to the
“
L
”
side to adjust
the left-hand mirror or to the
“
R
”
side to
adjust the right-hand mirror.
2. Move the knob in the direction you
want to move the mirror.
3. Return the knob to the neutral position
to prevent unintentional operation.
The mirrors can also be adjusted manu-
ally.