Subaru Tribeca 2010, Owner'S Manual

Page: 343 / 525

Black plate (243,1)
北 米
Model "A3150BE-A" EDITED: 2009/ 6/ 23
moisten a clean cloth with a diluted
neutral detergent to remove the wax.
.
The camera lens has hard coating to
help prevent scratches. However, when
washing the vehicle or cleaning the
camera lens, be careful not to scratch
the camera lens. Do not use a washing
brush directly on the camera lens. The
monitor screen may be adversely af-
fected.
.
Strong light shined on the camera
lens may develop white light stripes
around the light source. This is not a
malfunction.
.
Under the fluorescent light, the dis-
play may flicker. However, this is not a
malfunction.
.
The image of the rear view camera
may be slightly different from the
actual color of the objects.
&
How to use the rear view
camera
When the select lever is set to
“
R
”
, the rear
view camera automatically displays the
rear view image from the vehicle. When
the lever is set to other positions, the
image before setting to
“
R
”
is displayed.
1. Set the ignition switch to
“
ON
”
.
2. Set the select lever to
“
R
”
.
NOTE
.
The image of the rear view camera
has priority over other screen displays.
.
The image of the rear view camera is
horizontally reversed as is the case
with the vehicle rearview mirror or the
side view mirror.
.
It may be difficult to see the image of
the rearview camera in the following
cases. This is not a malfunction of the
camera.
–
The vehicle is in a dark place (at
night, in a tunnel, etc.).
–
The vehicle is in an extremely hot
or cold place.
–
An object (such as raindrops,
snow, dirt, etc.) that disturbs the
view of the rear view camera sticks
to the lens of the camera.
–
Strong light shined directly on
the camera lens (occasionally, there
are vertical lines on the screen).
&
Viewing range on the screen
Range of view
Range of view
Interior equipment
6-23
–
CONTINUED
–
6