Subaru Tribeca 2010, Owner'S Manual

Page: 359 / 525

Black plate (261,1)
北 米
Model "A3150BE-A" EDITED: 2009/ 6/ 23
“
R
”
position or vice versa until
the vehicle has completely
stopped. Such shifting may
cause damage to the transmis-
sion.
.
When parking the vehicle, first
securely apply the parking brake
and then place the select lever in
the
“
P
”
position. Avoid parking
for a long time with the select
lever in any other position as
doing so could result in a dead
battery.
NOTE
.
When the engine coolant tempera-
ture is still low, the automatic transmis-
sion will upshift to higher engine
speeds than when the coolant tempera-
ture is sufficiently high in order to
shorten the warm-up time and improve
driveability. The gearshift timing will
automatically shift to the normal timing
after the engine has warmed up.
.
Immediately after ATF (automatic
transmission fluid) is replaced, you
may feel that the automatic transmis-
sion operation is somewhat unusual.
This results from invalidation of data
which the on-board computer has
collected and stored in memory to
allow the transmission to shift at the
most appropriate times for the current
condition of your vehicle. Optimized
shifting will be restored as the vehicle
continues to be driven for a while.
&
Select lever
: With the brake pedal depressed, shift
while pressing the button in.
: Shift while pressing the button in.
: Shift without pressing the button.
The select lever has four positions,
“
P
”
,
“
R
”
,
“
N
”
,
“
D
”
and also has manual gate for
using
“
SPORT
”
mode or manual mode.
1) Select lever button
!
P (Park)
This position is for parking the vehicle and
starting the engine.
In this position, the transmission is me-
chanically locked to prevent the vehicle
from rolling freely.
When you park the vehicle, first set the
parking brake fully, then shift into the
“
P
”
position. Do not hold the vehicle with only
the transmission.
To shift the select lever from the
“
P
”
to any
other position, you have to depress the
brake pedal fully then push the select
lever button on the lever knob when the
ignition switch is in the
“
ON
”
position. This
prevents the vehicle from lurching when it
Starting and operating
7-13
–
CONTINUED
–
7