Black plate (269,1)
北
米
Model "A3150BE-A" EDITED: 2009/ 6/ 23
constant brake pedal pressure.
Do not pump the brake pedal
since doing so may defeat the
operation of the ABS system.
The ABS system prevents the lock-up of
wheels which may occur during sudden
braking or braking on slippery road sur-
faces. This helps prevent the loss of
steering control and directional stability
caused by wheel lock-up.
When the ABS system is operating, you
may hear a chattering noise or feel a slight
vibration in the brake pedal. This is normal
when the ABS operates.
The ABS system will not operate when the
vehicle speed is below approximately 6
mph (10 km/h).
&
ABS system self-check
You may feel a slight shock in the brake
pedal and hear the operating sound of
ABS from the engine compartment just
after the vehicle is started. This is caused
by an automatic functional test of the ABS
system being carried out and does not
indicate any abnormal condition.
&
ABS warning light
The ABS warning light illuminates when
the ignition switch is turned to the
“
ON
”
position and turns off after approximately 2
seconds.
This is an indication that the ABS system
is working properly.
CAUTION
If the warning light behaves as
follows, the ABS system may not
be working properly.
When the warning light illuminates,
the ABS function shuts down; how-
ever, the conventional brake system
continues to operate normally.
.
The warning light does not illu-
minate when the ignition switch
is turned to the
“
ON
”
position.
.
The warning light illuminates
when the ignition switch is
turned to the
“
ON
”
position, but
it does not turn off even when the
vehicle speed exceeds approxi-
mately 8 mph (12 km/h).
.
The warning light illuminates dur-
ing driving.
If these occur, have the ABS system
repaired at the first available oppor-
tunity by your SUBARU dealer.
NOTE
If the warning light behavior is as
described in the following, the ABS
system may be considered normal.
.
The warning light illuminates right
after the engine is started but turns off
immediately, remaining off.
.
The warning light remains illumi-
nated after the engine has been started,
but it turns off when the vehicle speed
reaches approximately 8 mph (12
km/h).
.
The warning light illuminates during
driving, but it turns off immediately and
remains off.
When driving with an insufficient battery
Starting and operating
7-21
–
CONTINUED
–
7
Summary of Contents for Tribeca 2010
