Subaru 2012 Legacy User Manual Download Page 217

Page: 217 / 474

Black plate (220,1)

北

米

Model "A2480BE-A" EDITED: 2011/ 7/ 26

5-34

Audio

Type C audio:

Model

Firmware version

iPod

1.2.1~1.3

classic

1.0.0~1.1.2

nano

1.3.1

nano 2G

1.1.3

nano 3G

1.0.0~1.1.3

nano 4G

1.0.0~1.0.3

touch

1.1~2.2.1

iPhone

3.1.3

4.2.1

3G S

4.2.1

CAUTION

Do not connect an iPod

other than

the previously stated models. Doing
so may result in a malfunction or,
depending on conditions, cause a
fire.

NOTE

iPod

is a registered trademark of

Apple Inc.

You are only permitted to personally

copy and play copyright-free material

or material that is legally permitted to
be copied and played by using an
iPod

and iTunes. Copyright infringe-

ment is prohibited by law.

To check the firmware version of an

iPod

, connect it to a computer and

check the device manager. For further
information, see the User

’

s Guide that

comes with the iPod

To update the firmware version of an

iPod

, visit the Apple Inc. website.

Depending on the model and firm-

ware version of an iPod

, it may not

work properly or not operate at all.

Connecting USB storage de-
vice / iPod

WARNING

Do not operate an iPod

while

driving. Doing so may distract your
attention from driving and could
lead to an accident.

CAUTION

If the data stored on an iPod

deleted while it is connected to
the in-vehicle system, the data
cannot be recovered.

Do not store an iPod

in the

vehicle. If an iPod

is left in the

vehicle for a long period of time,
it may be deformed, discolored
or damaged by high temperature.

NOTE

Even if a USB storage device or

iPod

is connected, it cannot be played

unless the USB/iPod

mode is se-

lected.

Movies stored on a USB storage

device or an iPod

cannot be played

while the storage device or iPod

connected to the system.

While an iPod

is connected, the

iPod

cannot be operated using the

click wheel on the iPod

(except some

models).

When using an iPod

by connecting

it to in-vehicle equipment, the order of
the list items displayed on the in-
vehicle equipment may be different
from that on the iPod

. However, this

does not indicate a malfunction.

An iPod

battery that is connected

to in-vehicle equipment will be charged
when the ignition switch is in the

“

”

“

Acc

”

position. However, activation

of the iPod

may be delayed if the

battery charge of the iPod

is low.

If an iPod

does not activate after

Summary of Contents for 2012 Legacy



























































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Legacy

Reviews:

Related manuals for 2012 Legacy

Brands by name

Popular brands

Subaru 2012 Legacy, User Manual

Search results

Summary of Contents for 2012 Legacy

Reviews:

Related manuals for 2012 Legacy

Brands by name

Popular brands