Subaru 2012 Legacy, User Manual

Page: 152 / 474

Black plate (153,1)
北 米
Model "A2480BE-A" EDITED: 2011/ 7/ 26
NOTE
The windshield washer fluid warning
light illuminates when the washer fluid
level in the tank has dropped to the
lower limit. If the warning light illumi-
nates, refill the tank with fluid. For the
tank refilling method, refer to
“
Wind-
shield washer fluid
” F
11-37.
&
Rear window wiper and
washer switch (Outback)
: Washer (accompanied by wiper operation)
ON: Continuous
INT: Intermittent
OFF: Off
: Washer (accompanied by wiper operation)
!
Rear wiper
To turn the rear wiper on, turn the knob on
the end of the wiper control lever upward
to the
“
INT
”
or
“
ON
”
position.
To turn the wiper off, return the knob on
the end of the lever to the
“
OFF
”
position.
With the switch turned to the
“
INT
”
position, the rear wiper will operate inter-
mittently at intervals corresponding to the
vehicle speed.
When you subsequently move the select
lever to the
“
R
”
position (AT and CVT
models) or the shift lever to the reverse
position (MT models), the rear wiper will
switch to continuous operation. When you
move the select lever/shift lever from the
“
R
”
(reverse) position to another position,
the rear wiper will return to intermittent
operation.
!
Washer
To wash the rear window while the rear
wiper is operating, turn the knob on the
end of the wiper control lever upward to
the
“ ”
position. The washer fluid sprays
until you release the knob.
To wash the rear window when the rear
wiper is not in use, turn the knob on the
end of the wiper control lever downward to
the
“ ”
position. The washer fluid sprays
and the wiper operates until you release
the knob.
Instruments and controls
3-33
3