Subaru 2012 Legacy, User Manual

Page: 144 / 474

Black plate (145,1)
北 米
Model "A2480BE-A" EDITED: 2011/ 7/ 26
−
22 to 122
8
F (
−
30 to 50
8
C).
The indicator can give a false reading
under any of the following conditions:
.
When there is too much sun.
.
During idling; while running at low
speeds in a traffic jam; when the engine
is restarted immediately following a shut-
down.
.
When the actual outside temperature
falls outside the specified indicator range.
!
Road surface freeze warning indi-
cation
1) U.S. spec. models
2) Except U.S. spec. models
When the outside temperature drops to
37
8
F (3
8
C) or lower, the temperature
indication flashes to show that the road
surface may be frozen.
If the outside temperature drops to 37
8
F
(3
8
C) or lower while the display is giving
an indication other than the outside
temperature, the display switches to the
outside temperature indication and flashes
for 5 seconds before returning to its
original indication.
If the display is already indicating an
outside temperature of 37
8
F (3
8
C) or lower
when the ignition switch is turned to the
“
ON
”
position, the indication does not
flash.
NOTE
The outside temperature indication
may differ from the actual outside
temperature. The road surface freeze
warning indication should be treated
only as a guide. Be sure to check the
condition of the road surface before
driving.
&
Average fuel consumption
1) U.S. spec. models
2) Except U.S. spec. models
This indication shows the average rate of
fuel consumption since the trip meter was
last reset.
Pressing the trip knob toggles the indica-
tion between the average fuel consump-
tion corresponding to the A trip meter
indication and the average fuel consump-
tion corresponding to the B trip meter
indication.
When either of the trip meter indications is
reset, the corresponding average fuel
consumption value is also reset.
Instruments and controls
3-25
–
CONTINUED
–
3