Subaru 2012 Legacy User Manual Download Page 227

Page: 227 / 474

Black plate (230,1)

北

米

Model "A2480BE-A" EDITED: 2011/ 7/ 26

5-44

Audio

NOTE

The Bluetooth

audio function may

not operate properly under the follow-
ing conditions.

–

The device is turned off.

–

The battery of the device has run

down.

–

The device is not connected to

the system.

–

The device is behind the seat or

in the glove box.

–

A metal material is covering or

touching the device.

Depending on the type of device that

is used, operation and sound volume
may be different from normal use of
those devices.

The sound quality may degrade due

to the influence of the device that is
connected to the system or the circum-
stances of the Bluetooth network.

When another Bluetooth

device is

simultaneously connected, noise may
be heard.

Media format

Bluetooth

audio devices cannot be

connected if they are not compatible with
the following

Bluetooth

profiles.

A2DP (Advanced Audio Distribution

Profile)

AVRCP (Audio/Video Remote Control

Profile)

Setting Bluetooth

audio

(type B audio)

1. Select

“

BT-A SETUP

”

by pressing the

“

”

button.

2. Perform the following procedure by
operating the

“

TUNE

”

dial while

“

BT-A

”

displayed.

NOTE

You cannot set Bluetooth

audio while

driving.

Registering (pairing) device

NOTE

Only one device can be registered.

1. Select the

“

PAIR AUDIO

”

menu.

–

If a device is already registered,

“

MEMORY FULL

”

is displayed and the

mode changes to the

Bluetooth

audio setting mode.

2. After the passkey is shown on the
display, input the passkey into the device.

–

If the registering procedure is fin-

ished,

“

PAIRED

”

and the name of the

device are displayed.

–

If the registering procedure was not

successful,

“

FAILED

”

is displayed.

After the name of the device or

“

FAILED

”

is displayed, the mode changes to the

Bluetooth

audio setting mode.

NOTE

After the ignition switch is turned to the

“

LOCK

”

position, the registered device

is not automatically connected to the
system even if the ignition switch is
turned to the

“

Acc

”

“

”

position.

Selecting device

1. Select the

“

SELECT AUDIO

”

menu.

–

If no devices are registered,

“

EMPTY

”

is displayed and the mode

changes to the

Bluetooth

audio

setting mode.

2. Select the

“

CONFIRM

”

menu.

–

Then the name of the selected

device is displayed.

–

If the device is connected,

“

SE-

LECTED

”

is displayed and the mode

changes to the

Bluetooth

audio

setting mode.

–

If the device cannot be connected,

“

FAILED

”

is displayed and the select-

ing procedure was not successful.

Setting passkey

1. Select the

“

SET PASSKEY

”

menu.

–

After the currently set passkey is

displayed, a new passkey can be

Summary of Contents for 2012 Legacy



























































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Legacy

Reviews:

Related manuals for 2012 Legacy

Brands by name

Popular brands

Subaru 2012 Legacy, User Manual

Search results

Summary of Contents for 2012 Legacy

Reviews:

Related manuals for 2012 Legacy

Brands by name

Popular brands