28
EN/11.2018/G67C © STULZ GmbH – all rights reserved
wib8000 original instructions
Config/Web Interface
Although these parameters appear in a menu which is specific for each unit, the data logger is a special func-
tion of the WIB. The data is not requested and recorded by the controller but by the WIB.
You get to this window by selecting the bottom item in the config menu of each unit.
Section: Config
Here you can provide the unit with a name, which also will appear in the bus and zone view. With the automatic
bus scan the unit preliminarily receives an automatically generated designation.
Section: datalog
With the datalog function you can record the chronological course of single measured values. Up to five
measured values per A/C unit can be protocoled this way.
You receive the recorded data in csv format in the shape of an e-mail according to the settings done in the
previous menu or displayed in the menu "Info/data/datalog" with the possibility for downloading.
Maximum5000linescanbeloggedforeachbus.Alinecontains1xtimestampand5xdatapoints(sensor
data). If there is only one unit in the bus 5000 intervals are logged. With 2 units 2500 intervals (2 lines are
written per interval, one for unit1 and one for unit2), with 5 units 1000 intervals.
