2
EN/05.2016 © STULZ GmbH – all rights reserved
reheat INStrUCtIONS
Cabinet size
Pipe - ø
mm
Thread size
inch
Installation
The electric reheat and the hotgas reheat are installed and connected in the A/C unit. The HW reheat must be
connected on site to an external hot water circuit.
• route the pipelines out of the A/C unit.
• the thread sizes for the connection piping of the HW reheat are listed in the following table.
Commissioning
No measures are required for commissioning.
Malfunction causes
Alarm: Reheat defect
All reheat alarms are detected and displayed by the C7000 controller.
C7000-control system:
no display (display only externally)
C7000 advanced terminal:
indication on the display
Temperatures:
Water inlet:
60°C
Water outlet:
40°C
Air inlet:
13°C
Glycol:
0%
1
2
3
4
5
7
16
22
22
22
28
28
1/2
3/4
3/4
3/4
1
1
