12
EN/03.2016 © STULZ GmbH – all rights reserved
steam humidifier iNstruCtiONs
11.1.4.6 Resetting fault indication (red LeD lights in normal operating mode)
To reset the error indication:
Disconnect the steam air humidifier from the mains. Wait approx. 5 seconds, then reconnect the unit to the
mains.
note:
If the fault has not been eliminated, the error indication reappears after a short while.
11.1.5 Maintenance
GH: Gesamthärte
DT: Dureté totale
TH: Total hardness
Service intervals for steam cylinder
depending on steam production in hours
Life time
range
Time/
hours
You find a detailed description of the maintenance procedures in chapter 5 of the humidifier service manual.
This manual is available on the website www.stulz.com in the e-Stulz area under „Downloads/Precision A/C“
as a pdf document.
Here you can only see a diagram, which shows the average life cycle of a steam cylinder in dependance of the
runtime and the total hardness.
The humidifier runtime can be read in the Info menu of the C7000AT or by the command „humi h“ in the
C7000.
