LUCAS
®
3 Chest Compression System –
Service Manual
3328798-002, ©2017 Physio-Control, Inc.
Page
74
of
91
•
Knock the
Spring
out with a
Hammer
and a
Mandrel
or similar tool. Tap the spring downwards with the
mandrel and hammer until it falls loose.
•
When the
Spring
is removed from the Angle Shaft, turn the device over so the press fitted side is facing up.
Using the metal Pin or similar tool and Hammer, push the bottom, non press-fitted Angel Shaft out of
Support Leg. Always knock out the non press fitted Angle Shaft first.
Knock the
Spring
from
round end out of shafts.
Spring
with a round end facing up (non-
press fitted side)
Spring
with a flat end facing down (press
fitted side)
Spring
