Stryker 0703-001-000 Instructions For Use Manual Download Page 26

Page: 26 / 63

0703-001-700 Rev-C

www.stryker.com

BUTTON

NAME

FUNCTION

Close

CLOSE ERROR MESSAGE

Touch the button to exit or close an error message.

Back

BACK

Touch the button to exit and return to the previous screen.

NOTIFICATION

Touch the button to access LOW PRIORITY alarm information. A
drop-down list of one or more messages will appear.

ERROR

Touch the button to access MEDIUM PRIORITY alarm
information. A drop-down list of one or more messages will
appear.

Quick Wash

QUICK WASH

Touch the button to select the QUICK WASH cycle option. A
cycle description and when the cycle was last performed are
provided.

Normal Wash

NORMAL WASH

Touch the button to select the NORMAL WASH cycle option. A
cycle description and when the cycle was last performed are
provided.

Extended Wash

EXTENDED WASH

Touch the button to select the EXTENDED WASH cycle option.
A cycle description and when the cycle was last performed are
provided.

Start

START

Touch the button to initiate the QUICK WASH cycle, the NORMAL
WASH cycle, or the EXTENDED WASH cycle (Figure 46). See

Table 18 Docking Cycle Options

Cancel

CANCEL

Touch the button to stop docking and prepare the rover for
release. The RELEASE FROM DOCKer button will appear.

Abort to Quick Wash

ABORT TO QUICK WASH

Touch the button to interrupt the NORMAL WASH or EXTENDED
WASH cycle and initiate the QUICK WASH cycle. This option
is only available during the early stages of the NORMAL WASH
cycle or EXTENDED WASH cycle.

Release From Dock

RELEASE FROM DOCK(er)

Touch the button, available after the cycle is complete or a
cancellation, to disconnect the rover from the docker.

0000160552, Rev. C Effective Date: Nov 25, 2015 1:43:15 PM

Print Date: Nov 25, 2015 02:19:13 PM

Summary of Contents for 0703-001-000
































































Search results

Summary of Contents for 0703-001-000

Reviews:

Related manuals for 0703-001-000

Brands by name

Popular brands

Stryker 0703-001-000, Instructions For Use Manual

Search results

Summary of Contents for 0703-001-000

Reviews:

Related manuals for 0703-001-000

Brands by name

Popular brands