Stryker 0703-001-000 Instructions For Use Manual Download Page 17

Page: 17 / 63

www.stryker.com

0703-001-700 Rev-C

6.2 Software Interface

6.2.1 Safety Information Screens

Failure to comply could result in serious injury or death

DO NOT connect directly

to chest tubes.

DO NOT connect to closed

wound drains.

WARNING

Figure 10 – Top Display WARNING Screen

Failure to comply could result in serious injury or death.

DO NOT connect

directly to chest

tubes.

DO NOT connect

to closed wound

drains.

DO NOT connect

directly to

tracheal tubes.

ALWAYS use the

minimum suction

limit required to

achieve the

desired clinical

outcome.

Confirm

I have read and understand the safety warnings

WARNING

002.003.000

Figure 11 – Main Display WARNING Screen

NOTE:

The software version number appears in the upper right corner of the main display WARNING screen. Make sure the

number on the screen matches the software version number on the cover of this instructions for use. If not, contact your
Stryker sales representative or call Stryker Neptune Customer Service to obtain the latest instructions for use manual. See

Section 1.3 Contact Information

0000160552, Rev. C Effective Date: Nov 25, 2015 1:43:15 PM

Print Date: Nov 25, 2015 02:19:13 PM

Summary of Contents for 0703-001-000
































































Search results

Summary of Contents for 0703-001-000

Reviews:

Related manuals for 0703-001-000

Brands by name

Popular brands

Stryker 0703-001-000, Instructions For Use Manual

Search results

Summary of Contents for 0703-001-000

Reviews:

Related manuals for 0703-001-000

Brands by name

Popular brands