58
www.stryker.com
EN
0703-001-700 Rev-C
Recommended separation distances between
portable and mobile RF communications equipment and the Neptune 3 Rover REF 0703-001-000
The Neptune 3 Rover REF 0703-001-000 is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The
customer or the user of the Neptune 3 Rover REF 0703-001-000 can help prevent electromagnetic interference by maintaining a minimum distance
between portable and mobile RF communications equipment (transmitters) and the Neptune 3 Rover REF 0703-001-000 as recommended below,
according to the maximum output power of the communications equipment.
Rated maximum output power of
transmitter
W
Separation distance according to frequency of transmitter
m
150 kHz to 80 MHz
d
=1.2√
P
80 MHz to 800 MHz
d
=1.2√
P
800 MHz to 2.5 GHz
d
=2.3√
P
0.01
0.12
0.12
0.23
0.1
0.38
0.38
0.73
1
1.2
1.2
2.3
10
3.8
3.8
7.3
100
12
12
23
For transmitters rated at a maximum output power not listed above, the recommended separation distance
d
in meters (m) can be estimated using the
equation applicable to the frequency of the transmitter, where
P
is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and
people.
16 Federal Communications
Commission (FCC) Statement
Concerning Radio Frequency
Interference
16.1 Manifold Authentication
16.1.1 FCC Compliance
This device complies with FCC 47 CFR Part 15 Subpart
C rules, limits for a Class B emissions. Operation is
subjected to the following two conditions:
1. This device may not cause harmful interference,
2. This device must accept any interference received,
including interference that may cause undesired
operation.
16.1.2 Radio License
Contains manifold receptacle printed circuit board
assembly (PCBA), Stryker part number 0703-001-820;
FCC ID Q9R-0703001820.
16.2 Docking Interface
16.2.1 FCC Compliance
This device complies with FCC 47 CFR Part 18 Inductive
Coupling for power transfer for a cleaning cycle between
the rover and docker.
0000160552, Rev. C Effective Date: Nov 25, 2015 1:43:15 PM
Print Date: Nov 25, 2015 02:19:13 PM
