Stryker 0700010000, Manual

Page: 31 / 56

27
Reprocessing
The camera console is not intended to come into contact with the patient. It
may be cleaned, but not sterilized. The camera head and coupler may contact
the patient and should both be cleaned and sterilized prior to every use.
Refer to the coupler user guide (Stryker part P26183) for instructions on
reprocessing the coupler.
Cleaning the Console
Should the camera console need cleaning, follow the warnings, cautions, and
instructions below. The user shall provide the mild detergent (or standard
disinfectant) and sterile cloth required for cleaning.
To avoid electric shock and potentially fatal injury, disconnect
the console from the AC power source before cleaning.
Observe the following cautions to avoid damaging the
console:
• Do not sterilize the console.
• Do not immerse the console in any liquid.
• Do not allow liquid to drip onto the console or collect on
any of its surfaces.
• Do not spray cleaning liquid directly onto the console,
power buttons, or connectors. Spray the cleaning liquid
onto a cloth, and use the cloth to wipe the console.
• Do not use corrosive cleaning solutions to clean the
console.
1. Spray a mild detergent or standard disinfectant onto a dry, sterile cloth.
Do not saturate the cloth.
2. Wipe the console. Do not allow liquid to drip from the cloth or collect on
the console.
3. When cleaning the front LCD screen, use extra care to prevent liquid from
dripping or pooling on the bottom of the screen. Excess liquid can enter
the console and cause product damage.